Contoh Primitives

Model eksekusi baru, kini dalam rilis beta

Rilis beta model eksekusi baru kini tersedia. Model eksekusi terarah memberikan fleksibilitas lebih saat mengkustomisasi alur kerja mitigasi error kamu. Lihat panduan Model eksekusi terarah untuk informasi lebih lanjut.

Versi paket

Kode di halaman ini dikembangkan menggunakan persyaratan berikut. Kami merekomendasikan penggunaan versi ini atau yang lebih baru.

qiskit[all]~=2.3.0
qiskit-ibm-runtime~=0.43.1

Contoh-contoh di bagian ini mengilustrasikan beberapa cara umum menggunakan primitives. Sebelum menjalankan contoh-contoh ini, ikuti instruksi di Instal dan atur.

catatan

Semua contoh ini menggunakan primitives dari Qiskit Runtime, tapi kamu bisa menggunakan base primitives sebagai gantinya.

Contoh Estimator

Hitung dan interpretasikan nilai ekspektasi operator kuantum yang diperlukan untuk banyak algoritma secara efisien dengan Estimator. Jelajahi penggunaannya dalam pemodelan molekuler, machine learning, dan masalah optimasi yang kompleks.

Jalankan satu eksperimen

Gunakan Estimator untuk menentukan nilai ekspektasi dari satu pasangan Circuit-observable.

# Added by doQumentation — required packages for this notebook
!pip install -q numpy qiskit qiskit-ibm-runtime

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import SparsePauliOp, random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, EstimatorV2 as Estimator

n_qubits = 50

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

mat = np.real(random_hermitian(n_qubits, seed=1234))
circuit = iqp(mat)
observable = SparsePauliOp("Z" * 50)

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)
isa_observable = observable.apply_layout(isa_circuit.layout)

estimator = Estimator(mode=backend)
job = estimator.run([(isa_circuit, isa_observable)])
result = job.result()

print(f" > Expectation value: {result[0].data.evs}")
print(f" > Metadata: {result[0].metadata}")

> Expectation value: -0.13582342954159593
 > Metadata: {'shots': 4096, 'target_precision': 0.015625, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}

Jalankan beberapa eksperimen dalam satu job

Gunakan Estimator untuk menentukan nilai ekspektasi dari beberapa pasangan Circuit-observable.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import SparsePauliOp, random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, EstimatorV2 as Estimator

n_qubits = 50

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng()
mats = [np.real(random_hermitian(n_qubits, seed=rng)) for _ in range(3)]

pubs = []
circuits = [iqp(mat) for mat in mats]
observables = [
    SparsePauliOp("X" * 50),
    SparsePauliOp("Y" * 50),
    SparsePauliOp("Z" * 50),
]

# Get ISA circuits
pm = generate_preset_pass_manager(optimization_level=1, backend=backend)

for qc, obs in zip(circuits, observables):
    isa_circuit = pm.run(qc)
    isa_obs = obs.apply_layout(isa_circuit.layout)
    pubs.append((isa_circuit, isa_obs))

estimator = Estimator(backend)
job = estimator.run(pubs)
job_result = job.result()

for idx in range(len(pubs)):
    pub_result = job_result[idx]
    print(f">>> Expectation values for PUB {idx}: {pub_result.data.evs}")
    print(f">>> Standard errors for PUB {idx}: {pub_result.data.stds}")

>>> Expectation values for PUB 0: 0.4873096446700508
>>> Standard errors for PUB 0: 1.3528950031716114
>>> Expectation values for PUB 1: -0.00390625
>>> Standard errors for PUB 1: 0.015347884419435263
>>> Expectation values for PUB 2: -0.02001953125
>>> Standard errors for PUB 2: 0.013797455737635134

Jalankan Circuit berparameter

Gunakan Estimator untuk menjalankan tiga eksperimen dalam satu job, memanfaatkan nilai parameter untuk meningkatkan penggunaan ulang Circuit.

import numpy as np

from qiskit.circuit import QuantumCircuit, Parameter
from qiskit.quantum_info import SparsePauliOp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit_ibm_runtime import QiskitRuntimeService, EstimatorV2 as Estimator

service = QiskitRuntimeService()
backend = service.least_busy(operational=True, simulator=False)

# Step 1: Map classical inputs to a quantum problem
theta = Parameter("θ")

chsh_circuit = QuantumCircuit(2)
chsh_circuit.h(0)
chsh_circuit.cx(0, 1)
chsh_circuit.ry(theta, 0)

number_of_phases = 21
phases = np.linspace(0, 2 * np.pi, number_of_phases)
individual_phases = [[ph] for ph in phases]

ZZ = SparsePauliOp.from_list([("ZZ", 1)])
ZX = SparsePauliOp.from_list([("ZX", 1)])
XZ = SparsePauliOp.from_list([("XZ", 1)])
XX = SparsePauliOp.from_list([("XX", 1)])
ops = [ZZ, ZX, XZ, XX]

# Step 2: Optimize problem for quantum execution.

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
chsh_isa_circuit = pm.run(chsh_circuit)
isa_observables = [
    operator.apply_layout(chsh_isa_circuit.layout) for operator in ops
]

# Step 3: Execute using Qiskit primitives.

# Reshape observable array for broadcasting
reshaped_ops = np.fromiter(isa_observables, dtype=object)
reshaped_ops = reshaped_ops.reshape((4, 1))

estimator = Estimator(backend, options={"default_shots": int(1e4)})
job = estimator.run([(chsh_isa_circuit, reshaped_ops, individual_phases)])
# Get results for the first (and only) PUB
pub_result = job.result()[0]
print(f">>> Expectation values: {pub_result.data.evs}")
print(f">>> Standard errors: {pub_result.data.stds}")
print(f">>> Metadata: {pub_result.metadata}")

>>> Expectation values: [[ 1.0455093   0.98152862  0.82113463  0.60354133  0.29572641  0.01149883
  -0.33110743 -0.60560522 -0.83322315 -0.96531231 -1.0257549  -0.95853095
  -0.81081517 -0.61091237 -0.30221293  0.0035381   0.31371176  0.61061753
   0.83646641  0.97091431  1.03135689]
 [ 0.03390682  0.31194271  0.620937    0.87391133  0.96973494  1.03872794
   0.94260949  0.82378821  0.56344283  0.28688115 -0.04570049 -0.37474403
  -0.64540887 -0.87803912 -0.97887504 -1.03577952 -0.97268336 -0.83970967
  -0.59705481 -0.29867482  0.0380346 ]
 [ 0.00265358 -0.32992806 -0.59646512 -0.80934096 -0.96737621 -1.00128302
  -0.94673728 -0.82703147 -0.59705481 -0.31341692 -0.00117937  0.29985419
   0.59469607  0.78486908  0.93346939  0.97622146  0.94732696  0.81199454
   0.60914332  0.28393273 -0.00678136]
 [ 0.99656555  0.93553328  0.78398456  0.55872536  0.29749546 -0.04511081
  -0.33523522 -0.62889773 -0.82201916 -0.95351864 -1.02634458 -0.96796589
  -0.82054495 -0.57553135 -0.30103356  0.00265358  0.3104685   0.59705481
   0.83322315  0.94437854  0.99214292]]
>>> Standard errors: [[0.014353   0.01441151 0.01620648 0.0195418  0.019762   0.01515649
  0.02102523 0.02112359 0.0148494  0.01119219 0.01576623 0.01245824
  0.01239832 0.01501273 0.01821305 0.01776286 0.01500156 0.01635231
  0.01577367 0.01315371 0.01089558]
 [0.01352805 0.01627835 0.01247646 0.01287866 0.01570182 0.01060924
  0.01590468 0.01620303 0.01530626 0.01619973 0.01918078 0.01379676
  0.01564971 0.01377673 0.01454324 0.01242184 0.01252201 0.01396738
  0.01326188 0.0145736  0.01795044]
 [0.02029376 0.01610892 0.0161542  0.0157785  0.01385665 0.01113743
  0.01375237 0.01380922 0.0145974  0.01759484 0.01594193 0.02111719
  0.01521368 0.01365888 0.01188512 0.01353009 0.01195674 0.01446547
  0.01660987 0.01511225 0.01880871]
 [0.01105161 0.01164476 0.01329858 0.01439545 0.01888747 0.01629201
  0.01405852 0.01406643 0.01088709 0.01275198 0.01281432 0.01333301
  0.01268483 0.01443594 0.01495655 0.01715532 0.01822699 0.01508936
  0.01435528 0.01340555 0.01295649]]
>>> Metadata: {'shots': 10016, 'target_precision': 0.01, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}

Gunakan Session dan opsi lanjutan

Jelajahi Session dan opsi lanjutan untuk mengoptimalkan performa Circuit pada QPU.

perhatian

Blok kode berikut akan mengembalikan error bagi pengguna Open Plan karena menggunakan Session. Beban kerja Open Plan hanya dapat berjalan dalam mode job atau mode batch.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import SparsePauliOp, random_hermitian
from qiskit_ibm_runtime import (
    QiskitRuntimeService,
    Session,
    EstimatorV2 as Estimator,
)

n_qubits = 50

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng(1234)
mat = np.real(random_hermitian(n_qubits, seed=rng))
circuit = iqp(mat)
mat = np.real(random_hermitian(n_qubits, seed=rng))
another_circuit = iqp(mat)
observable = SparsePauliOp("X" * 50)
another_observable = SparsePauliOp("Y" * 50)

pm = generate_preset_pass_manager(optimization_level=1, backend=backend)
isa_circuit = pm.run(circuit)
another_isa_circuit = pm.run(another_circuit)
isa_observable = observable.apply_layout(isa_circuit.layout)
another_isa_observable = another_observable.apply_layout(
    another_isa_circuit.layout
)

with Session(backend=backend) as session:
    estimator = Estimator(mode=session)

    estimator.options.resilience_level = 1

    job = estimator.run([(isa_circuit, isa_observable)])
    another_job = estimator.run(
        [(another_isa_circuit, another_isa_observable)]
    )
    result = job.result()
    another_result = another_job.result()

    # first job
    print(f" > Expectation value: {result[0].data.evs}")
    print(f" > Metadata: {result[0].metadata}")

    # second job
    print(f" > Another Expectation value: {another_result[0].data.evs}")
    print(f" > More Metadata: {another_result[0].metadata}")

> Expectation value: 0.08045977011494253
 > Metadata: {'shots': 4096, 'target_precision': 0.015625, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}
 > Another Expectation value: 0.02127659574468085
 > More Metadata: {'shots': 4096, 'target_precision': 0.015625, 'circuit_metadata': {}, 'resilience': {}, 'num_randomizations': 32}

Contoh Sampler

Hasilkan distribusi kuasi-probabilitas yang telah dimitigasi kesalahannya secara menyeluruh dari output rangkaian kuantum. Manfaatkan kemampuan Sampler untuk algoritma pencarian dan klasifikasi seperti Grover dan QVSM.

Jalankan satu eksperimen

Gunakan Sampler untuk mengembalikan hasil pengukuran sebagai bitstring atau hitungan dari satu Circuit.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, SamplerV2 as Sampler

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

mat = np.real(random_hermitian(n_qubits, seed=1234))
circuit = iqp(mat)
circuit.measure_all()

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)

sampler = Sampler(backend)
job = sampler.run([isa_circuit])
result = job.result()

# Get results for the first (and only) PUB
pub_result = result[0]

print(f" > First ten results: {pub_result.data.meas.get_bitstrings()[:10]}")

> First ten results: ['0101110000110001001111000101001111000110110100011000100101011101110011010010010101000110000111101010101000001010000100100000100', '0100010101111101010000100010011100110001010000011000000010001100010111000011001010000100100000100000000010000000010010101011110', '1101010111111111100010000011101010101010100100011001000000001001110010001000000010000010000101000111000100010010000001111000010', '1001110001100001001101111010111100000100010110010001001100111000110010111000001010001000000000000000100101101001110010101000110', '0001000000011011000011000111001000000000100110110011111110110100110000101010100010000010101011011000101011101000100000110000011', '1011100010011111010000001110110000111101000001110010011001100011111010001100100000110001000010001010110011100010000111000111010', '1101110000011000001011011000001111001110010111111111100100010001110100000010000001011000110000000011010011110100101001101000010', '0110100000110011000011001000110110110001000100100001111010001101000001010111000000101010101000001110100100001010110001000100101', '1000011010011011001111010010100000001110010010100000011010000110011010100000111000010010100111000001100101100010110010101001010', '1011011100111001010010101001000111000001110011110011001111010100100011101111011101011000000111011010000011100011010000001000000']

Jalankan beberapa eksperimen dalam satu job

Gunakan Sampler untuk mengembalikan hasil pengukuran sebagai bitstring atau hitungan dari beberapa Circuit dalam satu job.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.transpiler import generate_preset_pass_manager
from qiskit.quantum_info import random_hermitian
from qiskit_ibm_runtime import QiskitRuntimeService, SamplerV2 as Sampler

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng()
mats = [np.real(random_hermitian(n_qubits, seed=rng)) for _ in range(3)]
circuits = [iqp(mat) for mat in mats]
for circuit in circuits:
    circuit.measure_all()

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuits = pm.run(circuits)

sampler = Sampler(mode=backend)
job = sampler.run(isa_circuits)
result = job.result()

for idx, pub_result in enumerate(result):
    print(
        f" > First ten results for pub {idx}: {pub_result.data.meas.get_bitstrings()[:10]}"
    )

> First ten results for pub 0: ['1000000101000100010111001010101010000001001010101011011001011110001000000110110101010000010000000000110001001000011111110000001', '1111101011011011110001011000001100001101100001000101111011101110000101111010001011111010001001000010111001110111000010001011010', '1100100101110010000110101011110010111001101010001101100010110100110110000110110010001110001000001010011100001000011011000111010', '1100010010000100100010110100011010011001010101101101101001100001001110011001011011111100011100100001000101010000111101110001101', '0011101011101100010011111001001110000101100110000110000001111000011010011110000110100000110011011000000010110001010000111000100', '0110101101110000010110100100010011000100100010000010010010110001111111110000101011000100010000000100100100110011010111101110111', '1101011000111100011000010110000010001100101011000001110010110001111101010101011110110010000100011101000001010110010101000000100', '0000101010010100000010111110111000001011000000001011000110100010110011111000110110010110011010111101001011000000001101001110110', '1100101000110001000011111110010001011000010110010101101000000101011110000100011011111011011010001001110011011101001101010100000', '0110011000101110101001010100110010101000010111100001000111011000110101011010010101110011001010101000001001001000110010100010101']
 > First ten results for pub 1: ['1100100001011010010100000110101010100111101100110000100001011000100010001101010101101110000011010010011000010000010001000001000', '1100000011000000100110011000000110010000011111000000001010000101000010011001000001010000001000001010001000110010111000010000000', '0010000111101000111010101010101001010000001110100001011011100011000111000000010101001000010101001100000010100010011000000000010', '0010100100001000011100001010011000001010000010001000000001011100001010001110010110111101101000001101010101000000000011000100110', '0101101000011110111000100010000000101110100001010101110010001100001100001000111111110101001010100110000000010011111111000000010', '0101010111000000001110100110100011010111000111110100010010010001011010001000101001100001100110001001001000010010000011100100000', '0110010000001110111010010100010010010011010010110101001110010010001001101010111000010000000100011001001000001111010001100010010', '1100001100101011011010000110111110001101010100010100101100111000010000101101101010111011111011101100000000110000100101001000101', '0000111100001000000101101001010111110100011011011101101111000000001010001001100010110000100000000001010100110001001100110010000', '0100100001001011110000110001100001111011111100000001010111011011100010110111101110101111101010100101000000110111000110000000000']
 > First ten results for pub 2: ['1000010100111010101010111110101000110101010001111110011110011001010100001100100000000001000111111011001101100001001110011101100', '1110100000111000000000110110010100000011110000011110000110100010000100001100010101101001100100010111000010100101011000001000000', '1000010111011000000001110111010101000111111010010011110100001010000000111111100100001111111101010100001001011100111101010000010', '0000111011110110010011100111001010001000011010010110010010101000101110011100000010000101011000101001001001000100111101010100100', '0100000100111101110000101111011000100111101011101110100001000001000010101111100100000111010001101001100001100011011110101101100', '0100001000110101010010010100100110000100001010100001110001110101010011000111100111001001100000010100110111010111010100010100100', '0011111000010001101100000110111001000000100111110100001100001100010010010101011000000111011011111010100010000100100000100000000', '1000010010101100110110110110100010100000111001101011110100001000011000001000000110010001001011100100000000100000000000000000000', '0001011100010011111110011110000001000000010100111111000000101010000011011110110000110001010010000010010001000101110001111100010', '1111010100011100010010010110000101110000010001100101011111001100010111100001011001000001011010111011100001000001100000000000110']

Jalankan Circuit berparameter

Jalankan beberapa eksperimen dalam satu job dengan memanfaatkan nilai parameter untuk meningkatkan kemampuan penggunaan ulang Circuit.

import numpy as np
from qiskit.circuit.library import real_amplitudes
from qiskit.transpiler import generate_preset_pass_manager
from qiskit_ibm_runtime import QiskitRuntimeService, SamplerV2 as Sampler

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

# Step 1: Map classical inputs to a quantum problem
circuit = real_amplitudes(num_qubits=n_qubits, reps=2)
circuit.measure_all()

# Define three sets of parameters for the circuit
rng = np.random.default_rng(1234)
parameter_values = [
    rng.uniform(-np.pi, np.pi, size=circuit.num_parameters) for _ in range(3)
]

# Step 2: Optimize problem for quantum execution.

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)

# Step 3: Execute using Qiskit primitives.
sampler = Sampler(backend)
job = sampler.run([(isa_circuit, parameter_values)])
result = job.result()
# Get results for the first (and only) PUB
pub_result = result[0]
# Get counts from the classical register "meas".
print(
    f" >> First ten results for the meas output register: {pub_result.data.meas.get_bitstrings()[:10]}"
)

>> First ten results for the meas output register: ['1100011011100001011000001001000001111110000001011100011110011100111110000111000100011100001111100010010111110001001111011000101', '1100011101010101010000100110110110010001100101011101001011101010111110000111110100000011111010101101011101101101001111011110011', '0000000011000011001101001000111110001100010010011011001111000101000000001111111101101011100111010110111101010111011001010001011', '0101010001101110100010001100111001011101101100001000100001011101110100001000011011001011110101000110010001001010011011100011101', '0110101110000010110000001000010101100010010001001001101000010100110001011111110001000001100110010001011111001010011001001000101', '0111011111110111010111100110101000010100101000001010001001011111010010100111110110000011100001100000110000111000011011100000000', '0110100111001000100100110110010001011110000000110111000011110000100111001000100110011100100001100000101111111100010111100111001', '0101101111010110000000001000010110100101001100001101110010101111010110001010000111010010001111000000011001001001111100111010110', '0100000110010101111011110111000010001101011110010000110010001111001101010010000011111100100101101000010000111100111010000000110', '0011110110011011000110000100100110111000000010010101111011111000111001100011110100001100010100100001110101110100011100110001100']

Gunakan Session dan opsi lanjutan

Jelajahi Session dan opsi lanjutan untuk mengoptimalkan performa Circuit di QPU.

perhatian

Blok kode berikut akan mengembalikan error bagi pengguna paket Open Plan, karena menggunakan Session. Beban kerja di Open Plan hanya dapat berjalan dalam mode job atau mode batch.

import numpy as np
from qiskit.circuit.library import iqp
from qiskit.quantum_info import random_hermitian
from qiskit.transpiler import generate_preset_pass_manager
from qiskit_ibm_runtime import Session, SamplerV2 as Sampler
from qiskit_ibm_runtime import QiskitRuntimeService

n_qubits = 127

service = QiskitRuntimeService()
backend = service.least_busy(
    operational=True, simulator=False, min_num_qubits=n_qubits
)

rng = np.random.default_rng(1234)
mat = np.real(random_hermitian(n_qubits, seed=rng))
circuit = iqp(mat)
circuit.measure_all()
mat = np.real(random_hermitian(n_qubits, seed=rng))
another_circuit = iqp(mat)
another_circuit.measure_all()

pm = generate_preset_pass_manager(backend=backend, optimization_level=1)
isa_circuit = pm.run(circuit)
another_isa_circuit = pm.run(another_circuit)

with Session(backend=backend) as session:
    sampler = Sampler(mode=session)
    job = sampler.run([isa_circuit])
    another_job = sampler.run([another_isa_circuit])
    result = job.result()
    another_result = another_job.result()

# first job

print(
    f" > The first ten measurement results of job 1: {result[0].data.meas.get_bitstrings()[:10]}"
)

> The first ten measurement results of job 1: ['1101100010101100001001110000100011110011000010110000010000001011000110000110010100011000101111011110010101101001000101010100010', '0010100100011100001011111101001010010000010010000100000011001010001110101011010000100011001010000101110101110110010000110001110', '1011000110110011011010001111001011111000011111111010010010011000000110000001000101001111001000010110000000011101010000111101101', '0101000010000101001011111010110011101000100101010011001000010000011010000010101000000001000100010100011100101001000101001011000', '1101010101011100000001100110111001000100110011110001110011000000110100011011100000010000001100001101011000000001010101001101001', '1111100011111010000000100011100110101000010101100100000110000110001011100000000101010110011110010010000100011110000010101010100', '1011011100110001000110100100110010101101110010100010011100001000001100010101101110010101100000001110000000111001001000000100010', '0100011011110111010010111011101010111010010011011110011001000010101110100100111010110001101100110001010100000101001000000111001', '0001110001110000001011101101010001001110000010100001000101100100110111001011100000101010011100011001110011100100000000010110001', '1010110110111000001100011100000100101000000001111110110010000110011100100100100010000101111110100110010010010101001011001000011']

# second job
print(
    " > The first ten measurement results of job 2:",
    another_result[0].data.meas.get_bitstrings()[:10],
)

> The first ten measurement results of job 2: ['0100010001111001111010000100101010011010000100010110100100010010010110001010101010000000110000010000001100100011000110101000001', '1101000100010000011100110101001110101100001000000000101001110110110010110110010010011100010000010001011000011100100000100000000', '1111101010100011010100000100010101111110011000000000010000010000101001010001100000100000100010000001100111000000111000111010000', '0101111100000110010101101100101110101011010100001001110101100010111100110011100001110101000000001000000000101000100000001000000', '1101001000000000011000010100111110101111001001110011100001100100100100000011110001001000001000010101111100001001110010110011100', '1100001000110110000111110110010010000100001000001001100011110001111100100101110010010111010010101100001010101011100100001010010', '0001001100010000000101101101101111000011101100101000111010000000000010010111011000100000011010100000100011100010110010010000001', '1010101100000000011000111101000011100101000110110000111111000001100010001110000101111111110110000000000000001000000010001110000', '1111111001001001001100010000101110110100001011011100010001100000100001010100111011000110100011110000001010101000010000000011000', '1011011010101100010101100001001000000010110001101000100001111010000100011100000000100111001001000001001001101000001000100000000']

Langkah selanjutnya

Rekomendasi

• Tentukan opsi runtime lanjutan.
• Berlatih dengan primitif melalui pelajaran Fungsi biaya di IBM Quantum Learning.
• Pelajari cara men-transpile secara lokal di bagian Transpile.
• Coba panduan Bandingkan pengaturan Transpiler.
• Baca Migrasi ke primitif V2.
• Pahami Batas job saat mengirimkan job ke QPU IBM®.